Send inquiry
-
1. Components for the sheet profiling machine
The roll forming machine includes manual uncoiler unit, sheet guiding equipment, roll forming system, cutting equipment, hydraulic station, PLC control console and run out supporting table. -
2. Technical Parameters
Material Spec: galvanized steel, galvalume steel, pre-painted steel, and aluminum - Thickness: From 0.3 mm to 0.8mm
- Main motor power: 4 kw
- Hydraulic station power: 3 kw
- Feeding width: 1250mm
- Cover Width: 1000mm
- Yield Stress: 235Mpa (33KSI) ~ 350Mpa (50KSI)
- Roll forming Speed: 12 m/min.
- CuttingTolerance: +/-2.5mm(length≤5000mm);+/-3.0mm(5000mm<length≤10000mm)
- Manual Uncoiler: Capacity is 5 tons
- Voltage:380V, 3 phase, 50 HZ, or customized
- Type of cutting: Roll-formed and length-set cutting
3. Material of Main Equipments
Roller Material: High grade S45C forged steel, coated with hard chrome,and mirror polished - Active Shaft Material: High grade S45C carbon wrought steel, diameter 76mm
-
Electric Elements: PLC control console, touch screen and transducer,
from Siemens Germany - Cutter blades: Cr12 mould steel with quenched treatment , hardness HRC58~61, wear-resistance, good steel structure, long life.
- 4.Standard Equipment of Machine
1) Manual Uncoiler 1 set 2) Infeed Guide 1 set 3) Roll Forming Station 1 set 4) Post-cut Equipment 1 set 5) Hydraulic Station 1 set 6) PLC Control Console 1 set 7) Product Support Table 2 sets 8) Spare Parts 1 box -
